日本SMC大流量型油霧器參考書

產品型號： AL40-04-A

所屬分類：SMC電磁閥

更新時間：2025-03-06

簡要描述：日本SMC大流量型油霧器參考書
The problem of running out of oil is
prevented because the oil is fedautomatically.
This system makes lubrication work
unnecessary, thus significantly
reducing the amoun

聯系我們 在線咨詢

日本SMC大流量型油霧器參考書
減少相對運動件間的摩擦力,
2、減少密封材料的磨損,以防止泄漏,
3、防止管道及金屬零部件的腐蝕,延長元件使用壽命..
不給油潤滑：采用橡膠材料作為滑動部位的密封件，密封件帶有滯留槽結構內存潤滑脂來潤滑。
噴油潤滑：有油霧器和集中潤滑元件兩種。.
注意事項：
1、不給油潤滑元件也可給油潤滑，一旦給油，中途不得停止供油。
2、不要使用錠子油和機油，以免使密封件膨脹。.
 不給油潤滑已很普遍，而給油潤滑逐漸減少。
將潤滑油進行霧化并注入空氣流中,隨壓縮空氣流入需要潤滑的部位,達到潤滑的目的..

日本SMC大流量型油霧器參考書
When the volume of oil reaches a certain
level, float e ascends, valve t descends via
lever r, nozzle w closes, and the feeding of
oil stops, thus completing the oil feeding
process. When the oil inside the case is
consumed, float e descends, valve t ascends
via lever r, allowing oil to be fedfrom nozzle w.
The oil that has been pumped from the tank
passes through felt q where it is filtered,
and is fed into the case through nozzle w.